The name of the wind light is simply named after the fact that the light can be blown against the wind. The wind lamp is composed of three large blocks: outer frame, inner seat and kerosene lamp. The outer frame of the wind lamp is a rectangular parallelepiped with a hole on the upper side, which is used for smoking when the kerosene lamp is burned.

It is also necessary to wear a wire or iron bar on it to facilitate the hand-held convenience. The four sides of the wind lamp are composed of four rectangular glasses. The four rectangular glasses are clamped with four pillars. Sometimes, in order to be firm and firm, the four pillars are to be carved with a long strip of rectangular parallelepiped on one side.

Clip one side of the glass inside. In order to facilitate ignition and flameout, three sides of the four-sided glass are fixed, and one side is movable, that is, the glass can be inserted and extracted.

The inner seat of the wind lamp is also the lowermost side of the rectangular parallelepiped. Usually, a thick piece of wood is used as the material. In the middle of the block, a recessed place is to be dug, and the kerosene lamp is reserved.

This piece of wood is close to the edge of the four sides, and it will be engraved with the concave texture according to the position where the four sides of the glass are placed, just to catch the glass on all sides. In order to make the wind lamp more stable, some small nails are usually nailed on both sides of the concave groove of the wooden block to fix the glass.

After these have been done, use some small ink bottle-like bottles to make a kerosene lamp, and put the kerosene lamp into the glass on the side that can be twitched.


Post time: Mar-05-2019
WhatsApp Online Chat !